Hoses
Hose protection
STANDARD Hose fittings
Hose fittings / Crimp ferrules NO SKIVE
INTERLOCK Hose Fittings
Hose fittings / Ferrules LOW PRESSURE
Quick disconnect couplings
DIN/ISO Cutting ring couplings
Adaptors
Minimes couplings - Pressure gauges - Test kit - Flow blocks
Pipe clamps
SAE Flanges
Ball valves
Swivel joint
Hydraulic valves and regulators
Seals - Dustplugs and drainplugs
B-FLUID Hose crimpers & cutting
B-FLUID Tube processing
OP Hose crimpers & cutting
OP Tube processing
Other products
Femco® Drain technology
Werkplaatsbenodigdheden
»
»
BENDING MACHINE CM 42
This device was conceived for bending 6 to 42 mm diameter and 4 mm maximum thickness rigid stainless steel (AISI 316 TI) and carbon steel (ST 37.4) pipes.
The CM42 version can be fixed to any vice by means of the provided fixing pin and it is actuated by a double effect manual pump.
Technical Features
BENDING | 6 > 42x4 mm (0.236">1.654"x0.158") |
MATERIALS | AISI 316 TI - ST 37.4 |
DIMENSIONS L x W x H | 420x780x400 mm (16.535"x30.709"x15.748"") |
WEIGHT | 40 KG (90 lbs) |
MECHANICAL LIMIT SWITCH | incl. |
FIXING PIN | incl. |
Contact
Driehoekstraat 18
4706 PR te Roosendaal
The Netherlands
+31 (0)165 85 20 50
+31 (0)165 85 20 55